Function introduction: humidity control

Model: yh-hp60b

Parameters:

1. Wet film humidification: the humidification capacity of wet film is 4-6kg / h, the material of wet film is polymer material, the technical specification is 5090 type, and the outlet is tasteless, dust-free and atomized.

2. Refrigeration dehumidification: dehumidification capacity is 1.25-3kg/h, refrigerant is R410A, and OPD emission is 0.

3. Gas filtration: rapid degradation of indoor gaseous pollutants, nitrogen dioxide efficiency ≥ 99% (the test report issued by the national authority and stamped with the official seal of the manufacturer shall be provided on site).

4. Particulate matter purification: PM2 5＞99%。

5. The equipment is equipped with water disinfection device: quickly kill microorganisms in water and prevent export microorganisms from exceeding the standard (Photo Proof is required).

6. EC variable frequency fan, which operates in an energy-saving manner according to humidity and air quality.

7. PLC intelligent control system is equipped with RS485 communication and USB data export function as standard. The temperature, humidity and air quality form digital or curve report function in month, month and Sunday, with network control function.

8. Water leakage protection: double-layer water tank, double electric valve normally open and normally closed protection, mechanical self closing valve device, two-point alarm for water leakage alarm, remote sensing valve closing control device for water intake.

9. The equipment has sterilization function to kill microorganisms, and the killing rate of Aspergillus niger is ≥ 99%; (the test report issued by the national authority and stamped with the official seal of the manufacturer shall be provided on site).

10. The equipment shall be equipped with a control system. The control system shall not be lower than the level 5 operation interface. It can start and stop the water supply and drainage operation and active purification function on the level 2 interface. It can query the curve and data of indoor environmental data records according to the date, and has the function of export.

11. Installation method: A. add water manually during humidification and drain water manually during dehumidification. B. make up and drainage of auxiliary water tank. C. Automatic water adding and drainage.

12. With air quality sensor calibration function.

13. Overall dimension 550 × four hundred and forty × 1865（mm）。

14. Air volume 0-800m 3/ h。

15. Power supply: 220V / 50Hz, power ≤ 0.85kw.

16. Purification configuration: G3 initial effect + HEPA three in one high efficiency filter + idvoc gas filter + nano photohydrogen ion purification device + ionic water purification device.

17. With Lora wireless communication device.

18. It has water leakage alarm, overflow alarm, water full alarm and communication fault alarm.

19. Configure SMART File sensing nodes to realize data sharing, data connection and interconnection.